Stainless Steel Totes with Jacket

| Product Description

The jacket stainless steel totes can be customized with nozzle size, connection type, orientation, size and capacity. Conventional capacity is 1000L 1500L 2000L 2500L 3000L. The sheath area can be customized according to customer temperature requirements, single-sided, double-sided or four-sided.

| General Configuration

Material: SS304 SS316L

Flat top

Square slot

Flat slope bottom

Four thickened lifting lugs on the top

With forklift slot

Stackable (empty tanks)

The 8 corners are made with hemispherical molds, which are smooth and excessive to avoid sanitary dead corners.

| Product Features

1. High strength:

Due to the characteristics of stainless steel materials, stainless steel totes have better resistance to damage. Compared with other traditional materials, they are more resistant to the adverse effects of the external environment and errors during operation.

2. Designable:

Our stainless steel totes can be customized. Since different industries and different use environments have different requirements for product appearance and component size layout, stainless steel totes can currently meet the needs of all industries, from appearance dimensions to specifications of the inlet and outlet, to the top and sides. The components can be installed in different positions to achieve on-demand design.

3. Can be recycled:

Stainless steel totes  are made of stainless steel. This material is rust-resistant and resistant to a certain degree of acid and alkali. It is a recyclable material. The recycling of stainless steel tons of barrels greatly reduces product costs. Except for human factors, stainless steel tonnage barrels can be used for at least 20 years, which is in line with the environmental protection concept advocated by the world.

4. Easy to clean:

stainless steel totes have a smooth surface and relatively little residue. No complicated cleaning is required to achieve zero residue. At the same time, all parts of the stainless steel totes can be disassembled and cleaned individually, greatly reducing contamination between different contents.

5. Easy to maintain:

Stainless steel totes have relatively low maintenance costs and require almost no special maintenance under normal use. All its components can be disassembled and replaced. Importantly, each component can also be disassembled and replaced individually, reducing the cost of replacing the entire component.

| Standard Technical Parameter 

In addition, it can be customized according to customer needs, such as open top/closed top, agitator on the top, with or without jacket, the quantity and size of the nozzles, the inner surface can be mirror polished, the SS316L material can be customized, the thickness of the tank, and the sealing ring material will also be selected according to the specific materials. Customization cycle is 2-3 weeks. If you have other capacity or heat exchange requirements, please inquire about our other styles of IBC TOTE, or you can call or email for individual consultation info@prettech.cn

| Certificates

UN ，CCSC and IECEX Certificated

| Application

Stainless steel totes is an important container product, widely used in petrochemical, pharmaceutical, food and other industries. In the petrochemical industry, stainless steel barrels are mainly used to store and transport chemical products such as petroleum and natural gas; in the pharmaceutical industry, stainless steel barrels are used to prepare, store, and transport pharmaceutical liquids, pharmaceutical raw materials, etc.; in the food industry, stainless steel IBC totes are used to transport and store jam, juice, nut foods, etc.

| Quality Control

All our Stainless Steel Totes  will undergo the following tests before leaving the factory:

1. External Examination: - Check for any visible dents, scratches, or signs of damage on the exterior. - Inspect the frame and support structure for integrity.

2. Valves and Fittings: - Examine valves, gaskets, and fittings for leaks or damage. - Ensure valves operate smoothly and are securely fastened.

3. Gaskets and Seals: - Check gaskets and seals for wear or deterioration. - Replace any damaged or compromised seals.

4. Interior Inspection: - Clean the interior to ensure no residue or contaminants are present. - Use a flashlight to inspect the interior for rust, corrosion, or any signs of damage.

5. Lid and Closure: - Check the lid or closure for proper sealing. - Ensure the locking mechanism is functional and secure.

6. Pressure Testing (if applicable): - Perform a pressure test if specified by the manufacturer or regulations. - Verify that the pressure relief system is working correctly. Always follow safety guidelines and refer to the manufacturer's instructions for a comprehensive inspection process.

7. Leak testing: Before delivery, each tank should be tested with water to ensure there is no leakage.

8. High altitude drop test: Regularly conduct sampling and high-altitude drop tests，Ensure product quality.