 |
CHM-Top1
Prettech
500L-30,000L
| Product Description
A stainless steel mixing tank for conditioner is a common piece of equipment used in the cosmetics and personal care industry. Pretank design and manufacture customized stainless steel chemical mixing tanks for conditioner based on our customer's process conditions.
Our equipment can improve the efficiency of customer's mixing process, processing time, efficiency and energy use.Those tanks can be made by SUS304 or SUS316L or SUS316L for wetted parts and SUS304 for non-wetted parts according to the exact liquid PH value,to meet the liquid characteristics while save cost.All interior welds grounded,burr removed, and the internal finish are polished for easy washing.GMP certificate provided.
| Product Parameters
| Materials | SUS304/SUS316L,Carbon Steel,Nickel Alloy,Titanium etc |
| Materials Viscosity | ≤500,000 cps，customized |
| Production Capacity | 500-3000L，customized |
| Voltage | 208/220/380/400/415/440 V,3Phase 50/60hz |
| Profile/Type | Single layer,Double layer or Three layer |
| Tank type | Vertical type or Horizontal type |
| Certification | GMP, CE, UL,CSA, IECE, ATEX |
| Agitator type | Customize according to your medium characteristic and processing condition |
| Application Industry | Used for dispersing and mixing in industries such as paint, ink, adhesives, dyes, pesticides etc. |
| Temperature control | Adaptable heating/cooling methods including electric heating, steam heating or water cooling ensure customization to your requirment. |
| Drive mode | Electric drive, pneumatic drive, hydraulic drive, can be customized |
| Speed | High speed type, medium speed type, low speed type,can be customized |
| Sealed form | A variety of sealing forms are available to meet the design requirements of vacuum, normal pressure, low pressure, medium pressure and high pressure. |
| Surface treatment | PTFE coating, polyurethane coating, tungsten carbide coating, etc. |
-Half open top with hinged lids&Oval bottom
-Finish:interior brushed &exterior 2Bfinish
-2 x lug supporting
-Cooling jacket
-Sample valve:1/2" tri clamp
-Liquid level
-Cleaning ball
-Top agitator: Motor,gearbox,paddle agitaor,rack,mechanical seal
-Inlet&outlet 2"butterfly valve with tri clamp
-Drainage 2"butterfly valve with tri clamp
-Air vent
-Accessories:control box,pump,load cell,stainless steel pipelines
| Mixer Selection
We have different types for you choose according to characteristic of product, such as : homogenizer, paddle, frame, anchor, clover propelled, stirrer with scraper.
| Application
Pretank stainless steel mixing tank is widely used in liquid soap,hand washing,shampoo,show gel,detergent,cosmetics, skin care producd and daily use industries.
| Customer Case Picture
| FAQ
1. Except for SUS304 material, what other material do you do for the tanks?
A: We can provide a variety of grades of stainless steel, including SUS316L,SUS321,SUS316Ti; We also can make with material of titanium and Hastelloy Alloy.
2. We did not know how to do the import, could you help us to deliver the goods to our door?
A:Of course! We can do DDU or DAP terms. We can take care of the whole process from our factory to your door and you only need to make the unloading work within the specified time.
3.How do you ship the goods?
Goods are usually shipped in containers or flat rack with metal walls to protect them against extreme temperatures and bad weather conditions.
4. What should I do if there are quality problems?
A: We have a perfect quality control system to ensure there is no quality problem before dispatch. But in case there do have quality problem after arrival, we also have a rapid response and processing mechanism and reply in first time as we are 7 * 24 hours standby. Local repair as well as cargo replacement is supported to solve the problem.
5.What inspections will you do before delivery in your factory?
All tanks would be tested by static pressure test, dye penetration or X-ray test if requested.
6. Can you produce according to my requirements or drawings?
A: Yes,we can. Actually we always custimze for our customers and each project will have a special drawing. The customize point can be material, dimension, accessories as well as orientation and so on.
| Product Description
A stainless steel mixing tank for conditioner is a common piece of equipment used in the cosmetics and personal care industry. Pretank design and manufacture customized stainless steel chemical mixing tanks for conditioner based on our customer's process conditions.
Our equipment can improve the efficiency of customer's mixing process, processing time, efficiency and energy use.Those tanks can be made by SUS304 or SUS316L or SUS316L for wetted parts and SUS304 for non-wetted parts according to the exact liquid PH value,to meet the liquid characteristics while save cost.All interior welds grounded,burr removed, and the internal finish are polished for easy washing.GMP certificate provided.
| Product Parameters
| Materials | SUS304/SUS316L,Carbon Steel,Nickel Alloy,Titanium etc |
| Materials Viscosity | ≤500,000 cps，customized |
| Production Capacity | 500-3000L，customized |
| Voltage | 208/220/380/400/415/440 V,3Phase 50/60hz |
| Profile/Type | Single layer,Double layer or Three layer |
| Tank type | Vertical type or Horizontal type |
| Certification | GMP, CE, UL,CSA, IECE, ATEX |
| Agitator type | Customize according to your medium characteristic and processing condition |
| Application Industry | Used for dispersing and mixing in industries such as paint, ink, adhesives, dyes, pesticides etc. |
| Temperature control | Adaptable heating/cooling methods including electric heating, steam heating or water cooling ensure customization to your requirment. |
| Drive mode | Electric drive, pneumatic drive, hydraulic drive, can be customized |
| Speed | High speed type, medium speed type, low speed type,can be customized |
| Sealed form | A variety of sealing forms are available to meet the design requirements of vacuum, normal pressure, low pressure, medium pressure and high pressure. |
| Surface treatment | PTFE coating, polyurethane coating, tungsten carbide coating, etc. |
-Half open top with hinged lids&Oval bottom
-Finish:interior brushed &exterior 2Bfinish
-2 x lug supporting
-Cooling jacket
-Sample valve:1/2" tri clamp
-Liquid level
-Cleaning ball
-Top agitator: Motor,gearbox,paddle agitaor,rack,mechanical seal
-Inlet&outlet 2"butterfly valve with tri clamp
-Drainage 2"butterfly valve with tri clamp
-Air vent
-Accessories:control box,pump,load cell,stainless steel pipelines
| Mixer Selection
We have different types for you choose according to characteristic of product, such as : homogenizer, paddle, frame, anchor, clover propelled, stirrer with scraper.
| Application
Pretank stainless steel mixing tank is widely used in liquid soap,hand washing,shampoo,show gel,detergent,cosmetics, skin care producd and daily use industries.
| Customer Case Picture
| FAQ
1. Except for SUS304 material, what other material do you do for the tanks?
A: We can provide a variety of grades of stainless steel, including SUS316L,SUS321,SUS316Ti; We also can make with material of titanium and Hastelloy Alloy.
2. We did not know how to do the import, could you help us to deliver the goods to our door?
A:Of course! We can do DDU or DAP terms. We can take care of the whole process from our factory to your door and you only need to make the unloading work within the specified time.
3.How do you ship the goods?
Goods are usually shipped in containers or flat rack with metal walls to protect them against extreme temperatures and bad weather conditions.
4. What should I do if there are quality problems?
A: We have a perfect quality control system to ensure there is no quality problem before dispatch. But in case there do have quality problem after arrival, we also have a rapid response and processing mechanism and reply in first time as we are 7 * 24 hours standby. Local repair as well as cargo replacement is supported to solve the problem.
5.What inspections will you do before delivery in your factory?
All tanks would be tested by static pressure test, dye penetration or X-ray test if requested.
6. Can you produce according to my requirements or drawings?
A: Yes,we can. Actually we always custimze for our customers and each project will have a special drawing. The customize point can be material, dimension, accessories as well as orientation and so on.
